Preparation of ketoprofen‐loaded high‐molecular‐weight poly(vinyl alcohol) gels

High‐molecular‐weight atactic poly(vinyl alcohol) (a‐PVA) gels loaded with (R,S)‐2‐(3‐benzoylphenyl)propionic acid (ketoprofen) were prepared from 5, 6, 7, and 8 g/dL solutions of a‐PVA with a number‐average degree of polymerization of 4000 in an ethylene glycol/water mixture with an aging method to identify the effect of the initial polymer concentration on the swelling behavior, morphology, and thermal properties of a‐PVA gels. Then, the release behavior of ketoprofen from a‐PVA gels was investigated. As the polymer concentration decreased, the ability for network formation decreased, and the degree of swelling of the a‐PVA gels increased. In addition, the enthalpy increased with an increase in the a‐PVA concentration, but the melting temperatures of the gels prepared at different initial polymer concentrations were the same; this indicated that tighter gel networks would be formed by a higher polymer chain density. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Development of bond strength model for FRP plates using back‐propagation algorithm

For the flexural reinforcement of bridge and building structure, synthetic materials whose dynamic properties are superior and those containing the merit of corrosion‐proof are widely used as the substitute for a steel plate. Since FRP plate has improved bond strength owing to the fibers externally adhering to the plate, many researches regarding the bond strength improvement have been substantially performed. To search out such bond strength improvement, previous researchers had ever examined the bond strength of FRP plate through their experiment by setting up many variables. However, since the experiment for a research on the bond strength takes much of expenditure for setting up the equipment and is time‐consuming, also is difficult to be carried out, it is limitedly conducted. The purpose of this study was to develop the most suitable artificial neural network model by application of various neural network models and algorithm to the data of the bond strength experiment conducted by previous researchers. Many variables were used as input layers against bond strength: depth, width, modulus of elasticity, tensile strength of FRP plate and the compressive strength, tensile strength, and width of concrete. The developed artificial neural network model has been applied back‐propagation, and its error was learned to be converged within the range of 0.001. Besides, the process for the over‐fitting problem has been dissolved by Bayesian technique. The verification on the developed model was executed by comparison with the test results of bond strength made by other previous researchers, which was never been utilized to the learning as yet. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 5119–5127, 2006     

Mechanical properties and morphology of polymer blends of poly(ethylene terephthalate) and semiflexible thermotropic liquid crystalline polyesters

Two thermotropic liquid crystalline polyesters (TLCPs) with long flexible spacer groups in the main chain were prepared by melt polymerization: one was a homopolymer with only decane groups (LCPHO) and the other was a copolymer with hexane or decane groups (LCPCO) between mesogen units. These polyesters were blended with a matrix polymer of poly(ethylene terephthalate) (PET). Scanning electron microscopy (SEM) revealed the excellent interfacial adhesion between polyester and PET, and the large aspect ratio of polyester microfibrils in the blend fiber made by extruding and drawing the blend through a die. The aspect ratio was estimated by using the modified Halpin-Tsai equation. The fiber with LCPHO showed more extensive fibril formation than that with LCPCO.     

Resistivity and thermal reproducibility of carbon black and metallic powder filled silicone rubber heaters

Flexible heaters were prepared by extruding platinum‐catalyzed silicone rubber composites with conductive carbon black (CB) and metallic fillers. The conductor resistivity of the extruded heaters decreased in order of conductive titanium dioxide (TiO₂) > aluminum powder ≈ zinc powder > copper powder. Thermoelectric switching phenomena were investigated for the silicone rubber/CB/metallic powder systems. The positive temperature coefficient effect was dependent mainly on the CB content rather than on the content of the metallic powders. Resistivity and thermal reproducibility of the extruded heaters were also investigated by periodically applying AC voltage of 110 V. The heaters containing copper and TiO₂ powders exhibited excellent electrical reproducibility. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1122–1128, 2005     

Preparation and properties of (BATB–ODPA) polyimide–clay nanocomposite materials

A series of polymer–clay nanocomposite (PCN) materials consisting of 1,4‐bis(4‐aminophenoxy)‐2‐tert‐butylbenzene–4,4′‐oxydiphthalic anhydride (BATB–ODPA) polyimide (PI) and layered montmorillonite (MMT) clay were successfully prepared by an in situ polymerization reaction through thermal imidization up to 300°C. The synthesized PCN materials were subsequently characterized by Fourier‐Transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The effects of material composition on thermal stability, mechanical strength, molecular permeability and optical clarity of bulk PI and PCN materials in the form of membranes were studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), molecular permeability analysis (GPA) and ultraviolet‐visible (UV/VIS) transmission spectra, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1072–1079, 2004     

钒在陶瓷工业中的应用

本文通过钒的应用，阐述了金光釉和凹釉的形成机理。并说明了其在陶瓷釉料生产中所扮演的重要角色。     

Effect of hydrophobic hexafluoroisopropylidene group on the water sorption behaviors of rigid poly(p‐phenylene pyromellitimide) polyimide thin films

We prepared poly(p‐phenylene pyromellitimide) (PMDA–PDA), poly(p‐phenylene 4,4′‐hexafluoroisopropylidene diphthalimide), and their copolyimides with various compositions to explore the relationship between the water sorption and structure. The water sorption behaviors were gravimetrically investigated as a function of composition and temperature and interpreted with a Fickian diffusion model in films. Overall, the water sorption behaviors were strongly dependent on the changes in morphological structure, which originated from the variations in composition. When the content of the bulky hexafluoroisopropylidene group (6FDA) was increased, the water uptake decreased from 5.80 to 3.18 wt %, whereas the diffusion coefficient increased from 3.6 × 10^?10 to 11.3 × 10^?10 cm²/s. The relatively high water uptake in the PMDA–PDA polyimide film was successfully healed by the incorporation of 6FDA, which may have resulted from the increases in the intermolecular packing order and hydrophobicity. The degree of orientation and crystallinity, which are in‐plane characteristics, were directly correlated to the diffusion coefficient and activation energy in the polyimide film. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3442–3446, 2003     

Manufacturing and foaming of high melt viscosity of polypropylene by using electron beam radiation technology

The high melt viscosity of polypropylene was studied by grafting bifunctional monomers, 1,6‐hexanediol diacrylate (HDDA) and tripropylene glycol diacrylate (TPGDA), onto homopolypropylene (HPP) and random ter‐polypropylene (RTPP) under electron‐beam irradiation. Creation of the high‐melt‐viscosity polypropylene was possible at low radiation dosage and low monomer content, under a prohibition of both radiation degradation and homopolymerization. TPGDA monomer was more effective in increasing the melt viscosity of HPP compared with RTPP, whereas HDDA monomer was more effective for enhancing the melt viscosity of RTPP. Such different effects of monomers on melt viscosity may arise from different monomer structures, namely, TPGDA has additional three methyl groups, but HDDA has no methyl groups. Electron‐beam radiation technology, on an increase of the melt viscosity, was much more effective in HPP than RTPP, when compared with virgin polymers. Modified RTPP and HPP with high melt viscosity were capable of foaming with numerous fine cells, of which the modified HPP with 1.5 mmol TPGDA and 0.5 kGy could create more spherical foam cells and its bending strength was 1.5 times more than that of the foamed RTPP. POLYM. ENG. SCI., 46:431–437, 2006. © 2006 Society of Plastics Engineers.     

Preparation and properties of polyimide/silica hybrid composites based on polymer‐modified colloidal silica

A new type of polyimide/silica (PI/SiO₂) hybrid composite films was prepared by blending polymer‐modified colloidal silica with the semiflexible polyimide. Polyimide was solution‐imidized at higher temperature than the glass transition temperature (T_g) using 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA) and 4,4′‐diaminodiphenyl ether (ODA). The morphological observation on the prepared hybrid films by scanning electron microscopy (SEM) pointed to the existence of miscible organic–inorganic phase, which resulted in improved mechanical properties compared with pure PI. The incorporation of the silica structures in the PI matrix also increased both T_g and thermal stability of the resulting films. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2053–2061, 2006     

Phase Behavior and Mechanical Properties of Siloxane-Urethane Copolymer

Two series of siloxane-urethane copolymers were prepared from polydimethylsiloxane (PDMS) with a molecular weight of 1000 or 1800 which was used as a soft segment, 4,4′-diphenylmethane diisocyanate (MDI) and 1,4-butanediol (1,4-BD). Differential scanning calorimetry (DSC) demonstrated that the position (T_gs) and breadth (ΔB) of soft-segment glass transition of copolymers remained constant as the hard-segment content increased. Heat capacities at soft-segment glass transition of the copolymer (ΔCp) were 0.195∼0.411 J/g^○C and heat capacities of pure PDMS (ΔCp₀) were 0.571∼0.647 J/g^○C, leading to the various ΔCp/ΔCp₀ ratios. The ΔCp/ΔCp₀ ratios decreased as the increasing of hard-segment content, showing poor phase separation. The FTIR spectrum confirmed the occurrence of hydrogen bonding in ether end-group of pure PDMS. The ether group of the soft segment led to interfacial mixing between soft and hard segments. The tan δ of the soft segment determined by dynamic mechanical testing (DMA) also identified the mixing of soft and hard segments. The mechanical properties of the copolymer were directly related to either the soft and hard segment contents or the chain lengths of soft and hard segments. The hard segment that reinforced the soft segment and interfacial thickness between soft and hard segment dominated the mechanical properties.